Desplácese hacia abajo para Inglés. (For English scroll down.)
Sigue los pasos del 1 al 4 para agregar un Sensor de Presencia a tu cuenta OZOM.

- El sensor de presencia viene con su batería instalada, retira la lengueta plástica para que la batería se conecte.
- En la app OZOM ingresa al menú agregar productos y presiona el botón
para iniciar el modo de busqueda de productos.
- Mantén el botón presionado por 15 segundos hasta que la luz de color rojo brille rápidamente.
Suelta el botón y vuelve a presionarlo por tres segundos hasta que la luz brille de color verde. Esto indica que el proceso ha comenzado.
- Luego de unos segundos la app OZOM iniciará la conexión del Sensor de Presencia y al presionar "View progress" podrás ver la barra de progreso de carga. El Sensor de Presencia estará listo una vez que lo veas en el Dashboard de tu App OZOM.
Inglés/English:
Follow Steps 1 to 4 to add a Smart Button to your OZOM account.
- Set your OZOM box into adding-new-devices-mode by hitting the ‘Add’-button for this device in the list of devices that you see when you close this help. IMPORTANT: Make sure you have read and understood all steps before hitting the ‘Add’-button.
(You may also set the OZOM Box into pairing-mode directly by pressing the small black button at the back side of the OZOM Box (above the lock icon)).
- The Smart Button already contains a battery. Remove the plastic strap to activate the battery.
- Keep the button pressed for 15 seconds until you see a rapidly blinking red LED light shine through the blue plastic cover. Release the button. After a short moment press it again for 3 seconds until the LED light switched to green. The green light indicates that the adding process is in progress.
- It may take a few minutes before the OZOM App connects to the Smart Button and displays a progress bar. Your Smart Button is ready when you see its tile appear in the dashboard of your OZOM App.